Produced through controlled Thermex water-quenching technology that creates a tough tempered martensite outer ring around a soft, ductile ferrite-pearlite core.

Fe-500D & Fe-550D Yield

Sharp Transverse Ribs

High Elongation Index

Provides superior yield strength over 500 N/mm2 while maintaining low carbon content for quick on-site structural welding without preheating.

Computer-designed angled ribbing delivers maximum mechanical interlocking with concrete mixes, preventing internal slippage under heavy dynamic loads.

A high uniform elongation ratio (16%+) gives exceptional energy absorption during seismic movements, safeguarding columns from brittle shear failure.

Dimensional Chart & Unit Standards

All Raipur TMT rebars adhere strictly to IS 1786:2008 physical standard requirements. Standard delivery includes 12-meter straight lengths packed in tied bundle counts according to bar diameter.

Nominal Size & Weight Guide

• 8 mm Rebar: 0.395 kg/meter (10 Bars per Bundle) - Ideal for stirrups & slab mesh • 10 mm Rebar: 0.617 kg/meter (7 Bars per Bundle) - Standard floor slab reinforcement • 12 mm Rebar: 0.888 kg/meter (5 Bars per Bundle) - Primary beams & light columns • 16 mm Rebar: 1.579 kg/meter (3 Bars per Bundle) - Heavy beams & multi-story columns • 20 mm Rebar: 2.467 kg/meter (2 Bars per Bundle) - High-load commercial frames • 25 mm & 32 mm: 3.855 kg/m & 6.313 kg/m - Heavy foundation footings & bridge piers

Weight Tolerance

Corrosion Resistance

Standard Lengths

Strict compliance within ±3% to ±7% weight tolerance ranges specified under IS 1786 standards.

Low sulfur and phosphorus levels protect internal steel chemistry against moisture and chemical oxidation.

Supplied in standard 12-meter straight lengths or custom bend-cut profiles upon yard ordering.

Direct Yard Procurement

We maintain extensive stock of Raipur TMT bars directly sourced from primary integrated mills. Every lot is cataloged by heat batch number with full mill test documentation ready for immediate site audit.

Our fleet supports scheduled site deliveries across regional commercial projects, offering trailer-load dropoffs and customized cut-and-bend services directly from our stockyard.

Submit your required sizes, total estimated tonnage, and project location. Our commercial team will deliver a itemized quote within 2 hours.